P. Bochev (Sandia National Laboratorie), O. Ghattas (The University of Texas at Austin,), P. Kuberry (Sandia National Laboratorie), I. Tezaur (Sandia National Laboratorie) and K. Willcox (The University of Texas at Austin,)
T. Iliescu (epartment of Mathematics, Virginia Tech, Blacksburg), O. San (Oklahoma State University, Stillwater) and A. Veneziani ( Emory University, Atlanta)
M. Cenedese ( Institute for Mechanical Systems, ETH Zürich, Zürich, Switzerland), B. Kaszás ( Institute for Mechanical Systems, ETH Zürich, Zürich, Switzerland) and G. Haller ( Institute for Mechanical Systems, ETH Zürich, Zürich, Switzerland)
A. Beck (Institute for Fluid Dynamics and Thermodynamics Otto-von-Guericke University Magdeburg) and H. Xiao (Department of Aerospace and Ocean Engineering Virginia Tech)
D. Nordsletten (University of Michigan, Ann Arbor, USA), M. Behr (Chair for Computational Analysis of Technical Systems, RWTH Aachen University,) and J. Hoffman (Computational Science and Technology, KTH Royal Institute of Technology)
M. Bucelli (MOX, Laboratory of Modeling and Scientific Computing), L. Dede (MOX, Laboratory of Modeling and Scientific Computing), . Fumagalli (MOX, Laboratory of Modeling and Scientific Computing), A. Manzoni (MOX, Laboratory of Modeling and Scientific Computing) and A. Zingaro (MOX, Laboratory of Modeling and Scientific Computing)
B. Fanni ( BioCardioLab Fondazione Toscana), S. Celi ( BioCardioLab Fondazione Toscana) and D. Schiavazzi (Department of Applied and Computational Mathematics and Statistics, University of Notre Dame)
M. Perego (Center for Computing Research, Sandia National Laboratories, Albuquerque), S. Calandrini ( Fluid Dynamics and Solid Mechanics Group, Los alamos National Laboratory, Los Alamos), C. Eldred ( Center for Computing Research, Sandia National Laboratories, Albuquerque,) and I. Tezaur (Quantitative Modeling and Analysis Department, Sandia National Laboratories, Livermore)
E. Kubatko (The Ohio State University, Columbus), K. Kashiyama (Chuo University, Tokyo), C. Dawson (University of Texas at Austin, Austin) and E. Valseth (University of Texas at Austin, Austin)
A. Engsig-Karup (Technical Univerrsity of Denmark), S. Gavrilyuk (Aix-Marseille Université), H. Kalisch ( University of Bergen), M. Kazolea (Univ. Bordeaux,), M. Parisot (Univ. Bordeaux, ) and M. Ricchiuto (Univ. Bordeaux, )
H. Gomez (School of Mechanical Engineering Purdue University, US), . Leng (School of Mechanical Engineering Purdue University, US), V. Calo (School of Electrical Engineering, Computing & Mathematical Sciences Curtin University, Australi) and T. Hughes (Oden Institute for Computational Engineering and Sciences The University of Texas at Austin, USA)
F. Key (nstitute of Lightweight Design and Structural Biomechanics), M. Behr (Chair for Computational Analysis of Technical System) and S. Elgeti (Chair for Computational Analysis of Technical System)
G. Tabor (University of Exeter, United Kingdom), D. Emerson (STFC UKRI, United Kingdom), O. Ahmed Mahfoze (STFC UKRI, United Kingdom) and G. Chourdakis (Technical University of Munich)
P. Lyra (Mechanical Engineering Department, Universidade Federal de Pernambuco), D. Carvalho (Mechanical Engineering Department, Universidade Federal de Pernambuco), C. Maliska ( Mechanical Engineering Department, Universidade Federal de Santa Catarina Campus Universitário), M. Correa (Applied Mathematics Department Universidade Estadual de Campinas) and H. Hajibeyg (Department of Geoscience and Engineering, Delft University of Technology)
J. Yan (University of Illinois, Urbana-Champaign), G. Scovazzi, (Duke University), J. Evans (University of Colorado, Boulder), M. Hsu (Iowa State University), A. Korobenko (University of Calgary) and O. Colomés Gené (Delft University of Technology)
R. Rao ( Sandia National Laboratories Engineering Sciences), D. Noble ( Sandia National Laboratories Engineering Sciences), S. Roberts ( Sandia National Laboratories Engineering Sciences), A. Kucala ( Sandia National Laboratories Engineering Sciences), G. Wagner Anderson ( Northwestern University Department of Mechanical Engineering) and P. Anderson (Eindhoven University of Technology Materials Technology)
S. Clain ( Center of Physics and Dept. of Mathematics, University of Minho, Portugal), M. Ricchiuto (Team CARDAMOM, INRIA Univ. Bordeaux, France) and G. Scovazzi (Civil and Environnemental Engineering Dept., Duke University, North Carolin)
S. Prudhomme (Corresponding MS Organizer Department of Mathematics and Industrial Engineering Polytechnique Montréal), D. Guignard (Department of Mathematics and Statistics University of Ottawa ) and K. Kergrene (Laboratoire Roberval Université de Technologie de Compiègne)
A. Belme (Sorbonne Université, CNRS, UMR 719 Institut Jean le Rond d'Alembert ), P. Cinnella (Sorbonne Université, CNRS, UMR 719 Institut Jean le Rond d'Alembert ), M. Visonneau (Ecole Centrale Nantes, Laboratoire de recherche en Hydrodynamique, Energétique et Environnement Atmosphérique) and J. Wackers (Ecole Centrale Nantes, Laboratoire de recherche en Hydrodynamique, Energétique et Environnement Atmosphérique)
F. Alauzet (Gamma Project, INRIA Saclay Ile-de-France, France), T. Coupez (CEMEF, Mines ParisTech, Sophia Antipolis, France), S. Perotto (MOX, Politecnico Milano, Italy) and M. Picasso (Institute of Mathematics, EPFL, Switzerland)
K. Fidkowski (University of Michigan, Aerospace Engineering Department Ann Arbor), N. Nguyen (Massachusetts Institute of Technology, Department of Aeronautics & Astronautics Cambridge) and P. Persson (University of California, Berkeley, Department of Mathematics Berkeley)
S. Idelsohn (International Center for Numerical Methods in Engineering (CIMNE) Universidad Politécnica de Cataluña), E. Oñate (International Center for Numerical Methods in Engineering (CIMNE) Universidad Politécnica de Cataluña), J. Gimenez (International Center for Numerical Methods in Engineering (CIMNE) Universidad Politécnica de Cataluña) and G. Casas (International Center for Numerical Methods in Engineering (CIMNE) Universidad Politécnica de Cataluña)
P. Boivin (Aix Marseille Univ, CNRS, Centrale Marseille,), K. Luo (Department of Mechanical Engineering, University College London), M. Krafczyk (TU Braunschweig, Inst. for Computational Modeling in Civ. Eng.) and M. Geier (TU Braunschweig, Inst. for Computational Modeling in Civ. Eng.)
M. Möller (Delft Institute of Applied Mathematics (DIAM) Delft University of Technology Mekelweg ) and R. Steijl (CFD Laboratory, James Watt School of Engineering James Watt South Building, University of Glasgow)
W. Schröder (Institute of Aerodynamics and Chair of Fluid Mechanics) and M. Meinke (JARA Center for Simulation and Data Science, RWTH Aachen University)
M. Make (Chair for Computational Analysis of Technical Systems (CATS) RWTH Aachen University), M. von Danwitzb (Institute for Mathematics and Computer-Based Simulation (IMCS) Universität der Bundeswehr München), N. Hosters (Chair for Computational Analysis of Technical Systems (CATS) RWTH Aachen University) and M. Smuda (Chair of Fluid Dynamics (FDY) Technical University Darmstadt)
L. Beirao da Veiga (Dipartimento di Matematica e Applicazioni, Università di Milano-Bicocca), D. Di Pietro (University of Montpellier) and G. Vacca (Dipartimento di Matematica, Università degli Studi di Bar)
