INTERNATIONAL SCIENTIFIC COMMITTEE
The IACM Computational Fluids Conference started exactly 50 years ago Swansea, UK (1972) as the FEF Conference (Finite Element for Flow problems) the principal forum for the exchange of research results in all aspects of flow simulation using the finite element method.
After such a rich history, CFC aims to parallel the development and maturation of all numerical methods and its application to computational fluid dynamic problems.
Indeed, the scope of the conference is intentionally broad with coverage of theory, implementation, assessment and application in all of the major and emerging areas of fluid dynamics and flow-related phenomena.
Therefore, the international scientific committee has an important new role which is to gather all the Computational Fluids community together.
The International Scientific Committee of CFC2023 is composed of the following members (to be completed):
- Remi Abgrall, Institut für Mathematik & Computational Science Universität Zürich Winterthurerstrasse, Switzerland
- Nissrine Akkari, Safran Group, France
- Patrick Anderson, Eindhoven University of Technology, The Netherlands
- Santiago Badia, Monash University, Australia
- Joan Baiges, Universitat Politècnica de Catalunya, Spain
- Christophe Bailly, École Centrale de Lyon, France
- Yuri Bazilev, Brown University, United States
- Andrea Beck, Institut für Strömungstechnik und Thermodynamik (ISUT), Germany
- Marek Behr, RWTH Aachen University, Germany
- Lourenco Beirao da Veiga, University of Milano-Bicocca, Italy
- Pavel Bochev, Sandia National Laboratories, United States
- Pierre Boivin, Pierre Boivin Aix-Marseille Université, France
- Jean-François Boussuge , Centre Européen de Recerche et de Formation Avancée en Calcul Scientifique (CERFACS), France
- Marianna Braza, Institut de Mécanique des Fluides de Toulouse (IMFT), France
- Victor M. Calo, Curtin University Staff Profile, Australia
- Francisco Chinesta, ENSAM Institute of Technology, France
- Paola Cinnella, Sorbonne Université, France
- Tim Colonius, Caltech, United States
- Alessandro Corsini, Sapienza University of Rome, Italy
- Alvaro Coutinho, COPPE/Federal University of Rio de Janeiro, Brazil
- Massimiliano Cremonesi, Politecnico di Milano, Italy
- Elias Cueto, Universidad de Zaragoza, Spain
- Sebastien Deck, French Aerospace Lab ONERA, France
- Luca Dede, Politecnico di Milano, Italy
- Karthik Duraisamy, University of Michigan, United States
- Stefanie Elgeti, Institute of Lightweight Design and Structural Biomechanics, Austria
- John A. Evans, Aerospace Mechanics Research Center (AMREC), United States
- Miguel A. Fernández, Inria Bordeaux Sud-Ouest Research Center, France
- Paul Fischer, University of Illinois, United States
- Thomas-Peter Fries, TU Graz, Austria
- Hector Gomez, Purdue University Mechanical Engineering, United States
- Fernando Grinstein, Los Alamos National Lab, United States
- Alberto Guardone, Politecnico di Milano, Italy
- Jean-Luc Guermond, Texas A&M University, United States
- Koen Hillewaert, Université de Liège, Belgium
- Xiangyu Hu, Technical University of Munich, Germany
- Gianluca Iaccarino, Stanford University, United States
- Kenneth Jansen, Aerospace Mechanics Research Center (AMREC), United States
- Stavros Kassinos, University of Cyprus, Cyprus
- Barry Koren, Eindhoven University of Technology, The Netherlands
- Manfred Krafczyk, Technische Universität Braunschweig, Germany
- Trond Kvamsdal, NTNU, Norway
- Antonia Larese, Università degli Studi di Padova, Italy
- Mats G. Larson, Umeå universitet, Sweden
- Jonas Latt,University of Geneva, Switzerland
- David Le Touzé, École Centrale de Nantes, France
- Sanjiva Lele, Stanford University, United States
- Rainald Lohner, George Mason University, United States
- Li-Shi Luo, Old Dominion University United States
- Kai Luo, University College London United Kingdom
- Yvon Maday, Université Pierre et Marie Curie, France
- Krishnan Mahesh, Aerospace Engineering and Mechanics, United States
- Pierre-Henri Maire, CEA, France
- Renauld Mercier, Safran Group, France
- Johan Meyers, Katholieke Universiteit Leuven, Belgium
- Sanjay Mittal, Indian Institute of Technology Kanpur, India
- Robert Moser, The University of Texas, United States
- Franck Nicoud, Université de Montpellier, France
- Assad Oberai, USC Viterbi School of Engineering, United States
- Roger Ohayon, Conservatoire National des Arts et Métiers (CNAM), France
- Per-Olof Persson, Berkeley University, United States
- Marco Picasso, École polytechnique fédérale de Lausanne, Switzerland
- Ugo Piomelli, Queen's University, Canada
- Stefan Pirker, Johannes Kepler Universität Linz, Austria
- Jean Philippe Ponthot, Université de Liège, Belgium
- Serge Prudhomme, Polytechnique Montréal - Technological University, Canada
- Rekha Rao, Sandia National Laboratories, United States
- Michel Rasquin, Cenaero Research Center, Belgium
- Alessandro Reali, Università degli Studi di Pavia, Italy
- Julien Reveillon, University of Rouen, France
- Mario Ricchiuto, Inria Bordeaux Sud-Ouest Research Center, France
- Thomas Richter, Universität Magdeburg, Germany
- Scott A. Roberts, Sandia National Laboratories, United States
- Riccardo Rossi, Universitat Politècnica de Catalunya, Spain
- Gianluigi Rozza, Scuola Internazionale Superiore di Studi Avanzati (SISSA), Italy
- Ulrich Rüde, Friedrich-Alexander-Universität, Germany
- Maria Vittoria Salvetti, Università di Pisa, Italy
- Wolfgang Schröder, Institute of Aerodynamics, Germany
- Guglielmo Scovazzi, Duke University, United States
- Joern Sesterhenn, Technische Universität Berlin, Germany
- Ruben Sevilla, Swansea University, United Kingdom
- John N. Shadid, Sandia National Laboratories, United States
- Kenji Takizawa, Waseda University, Japan
- Harald van Brummelen, Eindhoven University of Technology, The Netherlands
- A.E.P. Veldman, University of Groningen, The Netherlands
- Alessandro Veneziani, Emory University, United States
- Roel Verstappen, University of Groningen, The Netherlands
- Roberto Verzicco, Università di Roma, Italy
- Vegard Vinje, Simula Research Laboratory, Norway
- Wolfgang Wall, Lehrstuhl für Numerische Mechanik, Germany
- Thomas Wick, Institut für Angewandte Mathematik, Germany
- Kun Xu, HKUST School of Engineering, Hong Kong
- Shinobu Yoshimura, University of Tokyo, Japan
